3. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
4. Pull the drive (2) away from the socket to remove it.
To install the solid-state drive, reverse the removal procedures.
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.
Audio jack
To remove the audio jack, use this procedure and illustration.
Table 5-7
Audio jack description and part number
Description Spare part number
Audio jack (includes cable) N11993-001
Before removing the audio jack, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 41).
50
Chapter 5Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
