4. Remove the SIM card slot blank insert (1) from the SIM card slot.
The SIM card slot blank insert is included in the Plastics Kit, spare part number N09286-001.
5. Remove the connector board (2) from the computer.
Reverse this procedure to install the connector board.
Fan
To remove the fan, use this procedure and illustration.
Table 5-9
Fan description and part number
Description Spare part number
Fan (includes cable and captive screws) N08535-001
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 41).
2. Remove the bottom cover (see Bottom cover on page 41).
3. Disconnect the battery cable from the system board (see Battery on page 43).
Remove the fan assembly:
Fan
53
To Next Page
Loading...
