Bottom
Component Description
(1) MicroSD memory card reader Reads optional memory cards that store, manage, share,
or access information.
To insert a card:
1. Hold the card label-side up, with the connectors
facing the computer.
2. Insert the card into the memory card reader, and
then press in on the card until it is rmly seated.
To remove a card:
▲ Press in on the card, and then remove it from the
memory card reader.
(2) Docking connectors (2) Connect an optional docking device.
(3) Vent Enables airow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and o during routine
operation.
14 Chapter 2 Components
To Next Page
Loading...
