Attaching the computer to a mounting fixture
The computer can be attached to a wall, swing arm, or other mounting fixture.
NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.
1. Press the supplied VESA trim plate onto the VESA opening until it snaps into place.
2. To attach the computer to a swing arm (sold separately), insert the four 20 mm screws that are supplied
with the computer through the holes on the swing arm plate and into the mounting holes on the
computer.
CAUTION: This computer supports the VESA industry standard 100 mm mounting holes. To attach a
third-party mounting solution to the computer, four 4 mm, 0.7 pitch, and 20 mm long screws are
required. These screws are supplied with the computer. Longer screws must not be used because they
may damage the computer. It is important to verify that the manufacturer’s mounting solution is
compliant with the VESA standard and is rated to support the weight of the computer. For best
performance, it is important to use the power and other cables provided with the computer.
To attach the computer to other mounting fixtures, follow the instructions included with the mounting
fixture to ensure that the computer is safely attached.
Attaching the computer to a mounting fixture 23
To Next Page
Loading...
Need help?
General