Installing a security cable on the fanless hub
You can secure the hub to a xed object with an optional keyed cable lock security cable extension and an
optional security cable available from HP.
NOTE: The security cable is sold separately as an aftermarket option kit only.
1. Locate the security cable slot on the back of the hub.
2. Insert the security cable lock into the slot, and then use the key to lock it.
Installing a security cable on the Engage One Pro
NOTE: The security cable is sold separately as an aftermarket option kit only.
1. Remove the screw from the bottom of the column (1).
2. Attach the security cable extension to the bottom of the column using the tamper-resistant screw (2)
included with the security cable extension.
3. Secure the other end of the security cable extension with a security cable (3).
Installing a security cable on the fanless hub 9
To Next Page
Loading...
