ENWW The HP Jetdirect EIO Control Panel Menu 251
PRIMARY DNS Specify the IP address (n.n.n.n) of a Primary
DNS Server.
SECONDARY DNS Specify the IP address (n.n.n.n) of a
Secondary Domain Name System (DNS)
Server.
PROXY SERVER Specifies the proxy server to be used by
embedded applications in your printer/MFP.
A proxy server is typically used by network
clients for Internet access. It caches Web
pages, and provides a degree of Internet
security, for those clients.
To specify a proxy server, enter its IP address
or fully-qualified domain name. The name can
be up to 255 octets.
For some networks, you may need to contact
your Independent Service Provider (ISP) for
the proxy server address.
PROXY PORT Enter the port number used by the proxy
server for client support. The port number
identifies the port reserved for proxy activity
on your network, and can be a value from 0
to 65535.
IPX/SPX ENABLE ON: Enable the IPX/SPX protocol
OFF: Disable the IPX/SPX protocol
FRAME TYPE Selects the frame type setting for your
network.
AUTO (default): Automatically sets and limits
the frame type to the first one detected.
EN_8023, EN_II, EN_8022, EN_SNAP:
Frame type selections for Ethernet
networks.
APPLETALK ENABLE (Ethernet/Fast Ethernet only)
ON: Enable the AppleTalk protocol
OFF: Disable the AppleTalk protocol
DLC/LLC ENABLE ON: Enable the DLC/LLC protocol
OFF: Disable the DLC/LLC protocol
Table B.2 HP Jetdirect Graphical Control Panel Menu (3 of 4)
Menu Item Options Description of settings
To Next Page
Loading...
Need help?
General
