18
2.6 Initial Settings
Before using the camcorder, we recommend you setup the correct Time
zone, Date and Time.
Note:
Please note that if you press the button during recording, the system will stop recording and
enter OSD menu. Make sure the recording is already stopped then continue operating the menu.
2.6.1 Set Time Zone
To set the time zone, do the following:
1. Press the button to enter the OSD menu.
2. Press the or button to select Set Time Zone, and then
press the button for entering function menu.
3. Press the or button to set the current time zone, and
then press the button to complete setting.
4. Press the button to return to recording screen.
Note:
If satellite positioning is not successful, camcorder clock will run based on user defined time.
To Next Page
Loading...
