Updating programs and drivers
To download and install software other than a BIOS update, follow these steps:
To use the HP Web site:
1. Open your web browser, go to
http://www.hp.com/support, and then select your country or region.
2. Click the option for software and driver downloads, enter your computer model number in the
Search box, and then press enter.
3. Click your specific product from the models listed.
4. Select your operating system.
5. When the list of drivers is displayed, click an updated driver to open a window containing additional
information.
6. Click Install now to install the updated driver.
NOTE: In some locations you may be able to download the driver and install it later. To do this,
click Download only to save the file to your computer. When prompted, click Save, and then select
a storage location on your hard drive. After the file is downloaded, navigate to the folder where the
file was stored, and double-click the file to install.
7. If prompted to do so, restart your computer after the installation is complete, and then verify the
operation of the device.
106 Appendix B Software updates
To Next Page
Loading...
Need help?
General