Ports and trunking 36
g. Select Trunk Groups.
h. Information about each configured trunk group is displayed. Make sure that trunk groups consist of the
expected ports and that each port is in the expected state.
Configurable Trunk Hash algorithm
This feature allows you to configure the particular parameters for the GbE2c Trunk Hash algorithm instead of having
to utilize the defaults. You can configure new default behavior for Layer 2 traffic and Layer 3 traffic, using the CLI
menu cfg/l2/thash. You can select a minimum of one or a maximum of two parameters to create one of the
following configurations:
• Source IP (SIP)
• Destination IP (DIP)
• Source MAC (SMAC)
• Destination MAC (DMAC)
• Source IP (SIP) + Destination IP (DIP)
• Source MAC (SMAC) + Destination MAC (DMAC)
To Next Page
Loading...
