Appendix C: Battery, Warranty and Service Information 99
4. Turn the calculator over and gently shake,
allowing the batteries to fall into the palm
of your hand.
CAUTION
In the next step, replace ail three batteries with fresh ones. If you
leave an old battery inside, it may leak. Furthermore, be careful
not to insert the batteries backwards. If you do so, the contents
of Continuous Memory may be lost.
5. Holding open the two plastic flags
shielding the battery compartment, insert
three new batteries. The batteries should
be positioned with their flat sides (the
sides marked +) facing toward the nearby
rubber foot, as shown in the illustration on
the calculator case.
6. Insert the tab of the battery compartment
door into the slot in the calculator case.
7. Lower the battery compartment door until
it is flush with the case, then push the door
inward until it is tightly shut.
8. Turn the calculator on. If for any reason
Continuous Memory has been reset {that
is, if its contents have been lost), the
display will show Pr Error. Pressing any
key will clear this message from the display.
To Next Page
Loading...
