HP Ink Tank 110 series - Specifications

Specications
For more information, visit HP support website at www.support.hp.com .
System requirements
● Software and system requirements can be found in the Readme le, which is available on the HP printer
software CD (if provided). You can also visit www.support.hp.com for the latest updates.
Environmental specications
● Recommended operating temperature range: 15℃ to 30℃ (59℉ to 86℉)
● Allowable operating temperature range: 5℃ to 40℃ (41℉ to 104℉)
● Humidity: 15% to 80% RH non-condensing; 28℃ maximum dewpoint
● Nonoperating (Storage) temperature range: -40℃ to 60℃ (-40℉ to 140℉)
● In the presence of high electromagnetic elds, it is possible the output from the printer may be slightly
distorted
● HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected
noise due to potential high electromagnetic elds
Input tray capacity
● Plain paper sheets (80 g/m2 [20lb]): Up to 60
● Envelopes: Up to 5
● Index cards: Up to 20
● Photo paper sheets: Up to 20
Output tray capacity
● Plain paper sheets (80 g/m2 [20lb]): Up to 25
● Envelopes: Up to 5
● Index cards: Up to 20
● Photo paper sheets: Up to 20
Paper size
● For a complete list of supported media sizes, see the printer software.
Paper weights
● Plain Paper: 64 to 90 g/m² (16 to 24 lb)
● Envelopes: 75 to 90 g/m² (20 to 24 lb)
● Cards: Up to 200 g/m² (110-lb index maximum)
● Photo Paper: Up to 300 g/m² (145 lb)
ENWW Specications 67