Status lights
●
Power button light
●
Printhead lights
●
Printhead priming status indicators
●
Error light, Warning light, and Resume light
●
Ink system maintenance
Power button light
● Status indications during normal operation
Status Description
On The printer is on.
O The printer is o.
Dimmed The printer is in Sleep mode. The printer automatically enters Sleep mode after 5 minutes of
inactivity. After 2 hours of inactivity, the printer automatically turns o if not connected to a
computer.
Blinking
The printer is processing a job. To cancel the job, press the Cancel button ( ).
Fast blinking – The printhead access door is open. You must close the door to continue printing.
– The printer is in an error state. You can resolve the error by following the onscreen
messages from the computer. If you do not see any onscreen messages, try printing a
document to generate an onscreen message.
● Status indications during printer rmware updates
Status Description
Blinking The printer rmware update is in progress.
On The printer rmware update is complete.
Printhead lights
● Power button light is on; and Printhead light of the printhead having an error is blinking quickly.
All other control panel lights are blinking quickly.
ENWW Status lights 7
To Next Page
Loading...
Need help?
General
