InterpretationFault/UID LED (amber/blue)Online/activity LED (green)
Do not remove the drive. Removing
a drive might terminate the current
operation and cause data loss. The
drive is part of an array that is
undergoing capacity expansion or
stripe migration, but a predictive
failure alert has been received for this
drive. To minimize the risk of data
loss, do not replace the drive until the
expansion or migration is complete.
Amber, flashing regularly (1 Hz)Flashing regularly (1 Hz)
Do not remove the drive. Removing
a drive might terminate the current
operation and cause data loss. The
drive is rebuilding, erasing, or it is part
of an array that is undergoing capacity
expansion or stripe migration.
OffFlashing regularly (1 Hz)
The drive is active, but a predictive
failure alert has been received for this
drive. Replace the drive as soon as
possible.
Amber, flashing regularly (1 Hz)Flashing irregularly
The drive is active, and it is operating
normally.
OffFlashing irregularly
A critical fault condition has been
identified for this drive, and the
controller has placed it offline. Replace
the drive as soon as possible.
Steadily amberOff
A predictive failure alert has been
received for this drive. Replace the
drive as soon as possible.
Amber, flashing regularly (1 Hz)Off
The drive is offline, a spare, or not
configured as part of an array.
OffOff
14 Installing the server blade into the enclosure
To Next Page
Loading...
Need help?
General