Table 6: Enclosure single-phase HPE 2400 W power supply specifications
Specification Value
Power cord IEC-320 C19-C20
Output 2450 W per power supply
Input requirements
Rated input voltage 200–240 VAC
Rated input frequency 50-60 Hz
Rated input current per power supply (maximum) 13.8 A at 200 VAC
13.3 A at 208 VAC
12.6 A at 220 VAC
Maximum inrush current 100 A for 10 ms
Ground leakage current 3.5 mA
Power factor correction 0.98
Table 7: Enclosure 3-phase 2400 W power supply specifications (North America/
Japan)
Specification Value
Power cords (4) NEMA L15-30p
3.0 m (10 ft)
Max input current per line cord 24.0 A at 200 VAC
23.1 A at 208 VAC
Output 2450 W per power supply
Input requirements
Rated input voltage 200–240 VAC line-to-line 3-phase
Rated input frequency 50–60 Hz
Maximum inrush current 100 A for 10 ms
Ground leakage current 3.5 mA
Power factor correction 0.98
26 System specifications
To Next Page
Loading...
