3-59
Using Identity Driven Manager
Using the User Import Wizard
b. Select the LDAP Authentication type to be used with the imported user
data:
c. Click Next
to continue to the Authentication details window:
The Authentication details will vary based on the Authentication type
selected; however, all LDAP Authentication methods require the following
information:
•
Server – The IP Address or DNS name (fully qualified domain name)
of the LDAP server.
The IP address can be used for Simple, Anonymous, and Kerberos-V5
authentication in non-SSL mode.
•
Domain – The domain name that will be used to create the Realm in
IDM.
•
Base DN – The Base Distinguished Name. This is the node in the
directory where the search for users will begin. For example, for the
domain "hp.com" the
Base DN entry would be: dc=hp,dc=com
Authentication Description
Simple Simple authentication, which is not very secure, sends the
LDAP server the fully qualified DN of the client (user) and
the client's clear-text password.
Digest-MD5 In Digest MD5, the server generates a challenge and the
client responds with a shared secret (password).
Kerberos-V5 Based on Internet standard security, Kerberos V5
authentication is used with either a password or a smart
card for interactive logon.
External-TLS External authentication uses authentication services
provided by lower level network services such as TLS.
Anonymous No authentication is required by LDAP server.
To Next Page
Loading...
Need help?
General