2-33
Getting Started
User Session Information
Finding a User
The Find User feature lets you search for and display information about a user
by name or MAC address. The displayed information is similar to User Session
Status information.
To find information for a user or MAC address:
1. In the IDM navigation tree, right-click the Realms or Access Policy Groups
folder to which the user or computer is assigned. Select Find User from the
right-click menu.
This launches the Find User window.
2. In the Username field, type the complete user name of the user you want
to find and display information (This field is not case-sensitive.),
OR
Access Policy Group Access policy group that governs user permissions for the
session.
Access Profile Access profile assigned to the access policy group.
QoS assigned Quality of service or priority for outbound traffic. QoS ranges
from lowest to highest.
Rate limit assigned Maximum bandwidth allocated to user by the access
profile.
VLAN assigned The VLAN to which access is given. The DEFAULT_VLAN(1)
is equivalent to allowing access on the entire network.
ACL The access control rules that were applied to the user's
session on the switch or access point.
To Next Page
Loading...
Need help?
General