4-6
Troubleshooting IDM
IDM Events
6. In the Criteria field, enter the criteria used to select events. The Criteria
field works in conjunction with the Operator field.
For example, to filter out Informational events, the Filter options would
look like this:
When the filter is activated, only events with a severity greater than
Informational are displayed.
NOTE: In "Severity" filters, events matching the criteria will be filtered out along
with events of greater or lesser value. In "Date" filters, only events of
greater or lesser value than the criteria are filtered.
7. Click Ok to save the filter definition and exit the New Filters window.
The new filter appears in the "
Manage Filters" list.
8. Click Ok to close the Manage Filters window.
9. Click "
Select Filters" on the Events toolbar to display the list of filters, then
click to select the filter to be applied. A check indicates the filter is "on."
To modify an event filter:
1. Click the Configure Filters icon on the Events toolbar to display the
Manage Filters window.
2. In the Manage Filters window, select the filter to be modified and click
"
Modify" to display the Modify Filter window (similar to New Filter).
To Next Page
Loading...
Need help?
General