3-24
Using Identity Driven Manager
Configuring Access Profiles
NOTE: If you are assigning any VLAN other than the default VLAN, ensure that the
VLAN is configured correctly on the all switches to which this access profile
will be applied before defining the access profile.
The VLAN that gets set for a user will override the statically configured VLAN,
as well as the
auth-vid which may have been configured for that port. Note
also that if an
unauth-vid is set and the user is rejected by IDM for any reason,
the port is opened and the VLAN is set to the
unauth-vid.
4. To assign the Network Resources, click Edit... This launches the Network
Resource Assignment
Wizard.
5. Click Next to continue to the Allowed Network Resources window.
To Next Page
Loading...
