HP JG221A - Display Oam Configuration

Field Description
Link Status Link status
Information of the latest received
OAM packet
Information about the latest received Ethernet OAMPDU
OAMRemoteMACAddress MAC address of the Ethernet OAM peer
OAMRemotePDUConfiguration Maximum Ethernet OAMPDU size allowed
OAMRemoteState State of the Ethernet OAM peer
Remote_mux_action Peer sending mode. For more information, see Table 1.
Remote_par_action Peer receiving mode. For more information, see Table 1.
OAMRemoteConfiguration Configuration of the peer Ethernet OAM entity
OAM Mode Ethernet OAM mode
Unidirectional Support Indicates whether unidirectional transmission is supported (YES or NO)
Loopback Support
Indicates whether Ethernet OAM remote loopback is supported (YES or
NO)
Link Events
Indicates whether Ethernet OAM link error events are supported (YES or
NO)
Variable Retrieval Indicates whether MIB variable retrieval is supported (YES or NO)
OAMRemoteFlagsField Values of the peer Ethernet OAM flag fields in OAM packets
Link Fault Indicates whether a link fault is present: 0 for no and 1 for yes
Dying Gasp Indicate whether a fatal fault is present: 0 for no and 1 for yes
Critical Event Indicate whether a critical fault is present: 0 for no and 1 for yes
Local Evaluating
Indicates whether the local-to-remote configuration negotiation is
complete:
• COMPLETE for completed
• REVERSED for uncompleted
Remote Evaluating
Indicates whether the remote-to-local configuration negotiation is
complete:
• COMPLETE for completed
• REVERSED for uncompleted
display oam configuration
Syntax
display oam configuration [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
4