HP L1940

65
HP L1940
Go to cover page
GENERALPRODUCT SPECIFICATION(Continued)
15
BRAND : HP L1940
19 inch LCD Monitor
TYPE :EJ6B50/02
8639 000 15804
2004-08-31
2004-08-31
590
28
Jacky Lee
STATUS H-syncV-syncVideo PowerLED indicator
On On On Active < 70W
Green LCD
(*Note1)
Stand-by Off On Blanked <2W
AmberLCD
(*Note2)
Suspend On Off Blanked <2W
AmberLCD
(*Note2)
Off Off Off Blanked <2W
AmberLCD
(*Note2)
DC Switch
off
N/AN/AN/ A <1W Off (*Note 2)
Note 1: Included two activeexternal USB devices
Note 2: Measurement isrequired to connect PC via USB 2.0 upstream cable and be
without any external USB devices. Theoperating system isrequired to be
Windows XP , and USB interfaceofPC shall conform to USB 2.0 compliance.
3.6 Display identification
3.6.1 Analog DDC
In accordance withVESA Display Channel Standard V1.0 and having DDC-2B
capability.
3.6.2 Digital DDC
In accordance with DVI require
ment (DDWGdigital Visual Interface revision 1.0)use
DDC-2B and EDID 3.0 structure 2.0
4.0 Visual characteristics
4.1 Test conditions
Unless otherwise specified, thisspecification is defined under the followingconditions.
AC
voltage: 120 VAC 60 Hz and 230 VAC 50 Hz
Video Signal: NativeResolution(1280x1024) @ 60 Hz, 0.7 V p-p
Warm up: Morethan 30 minuteswithfull white picture
Temperature:20°Cto25°C
Contrast: 100% setting (gain =1)
Brightness:100% setting
Color Temperature: 6500K
Ambient Ligh
t: No ambient light(<10 lux)
Meter: Microvision ss230 (or equivalent)
4.2 Resolution
Factory preset modes (15 modes)