Advanced configuration with HP Embedded Web Server (EWS)
(wireless models only)
Use the HP Embedded Web Server to manage printing functions from a computer instead of the printer control
panel.
●
View printer status information
●
Determine the remaining life for all supplies and order new ones
●
View and change tray configurations
●
View and change the printer control-panel menu configuration
● View and print internal pages
● Receive notification of printer and supplies events
●
View and change network configuration
The HP Embedded Web Server works when the printer is connected to an IP-based network. The HP Embedded
Web Server does not support IPX-based printer connections. Internet access is not needed to open and use the
HP Embedded Web Server.
When the printer is connected to the network, the HP Embedded Web Server is automatically available.
NOTE: The HP Embedded Web Server is not accessible beyond the network firewall.
Open the HP Embedded Web Server (EWS) from a web browser
1. Print a configuration page to determine the IP address or host name.
a. Press and hold the Cancel
button until the Ready light begins blinking.
b. Release the Cancel
button.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on
the printer configuration page. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be safe,
select the option to continue to the website. Accessing this website will not harm the computer.
34 Chapter 5 Manage the printer ENWW
To Next Page
Loading...