Restore the factory-set defaults
Restoring the factory-set defaults returns all of the printer and network settings to the factory defaults. It will
not reset the page count, tray size, or language. To restore the printer to the factory-default settings, follow
these steps.
CAUTION: Restoring the factory-set defaults returns all of the settings to the factory defaults, and it also
deletes any pages that are stored in the memory.
1. Open the HP Embedded Web Server (EWS):
Network-connected printers
a. Print a configuration page to determine the IP address or host name.
i. Press and hold the Cancel
button until the Ready light begins blinking.
ii. Release the Cancel
button.
b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays
on the printer configuration page. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be
safe, select the option to continue to the website. Accessing this website will not harm the computer.
2. Click the Settings tab.
3. Select the Restore Factory Settings option, and click the Apply button.
The printer automatically restarts.
48 Chapter 6 Solve problems ENWW
To Next Page
Loading...