Table 6-2 Control-panel light patterns (continued)
Light status State of the printer Action
The wireless light is blinking.
The printer is attempting to locate a wireless
network.
No action is required.
The wireless light is on.
The printer is connected to a wireless
network.
No action is required.
The wireless light is off.
The printer is not connected to a network,
and the wireless unit in the printer might be
turned off.
If the light is off, the printer is not connected
to the network and the wireless unit in the
printer might be off. Press the wireless
button to try connecting to the network, or
run the Wireless Configuration utility to
configure the printer. To verify that the
printer finds the network, print a
configuration page. The printer should have
an IP address assigned to it.
For information about connecting wirelessly
to a network, see
Solve wireless problems
on page 64.
If the printer remains unable to connect to
the network, uninstall and then reinstall the
printer. If the error persists, contact a
network administrator or refer to the user
manual of the wireless router or access
point.
ENWW Interpret control-panel light patterns 47
To Next Page
Loading...