Interpret control-panel light patterns
If the printer requires attention, an error code appears on the control-panel display.
Table 6-1 Status-light legend
Symbol for "light off"
Symbol for "light on"
Symbol for "light blinking"
Table 6-2 Control-panel light patterns
Light status State of the printer Action
All lights are off.
The printer is in Auto-Off mode or is turned
off.
Press the power button to deactivate the
Auto-Off mode or to turn on the printer.
Status lights cycle
The status lights cycle during the formatter
initialization period or when the printer is
processing a cleaning page.
No action is required. Wait for the
initialization period to end. The printer
should enter the ready state when the
initialization period is finished.
Ready light is on, and attention light is off.
The printer is in the ready state. No action is required. The printer is ready to
receive a print job.
ENWW Interpret control-panel light patterns 45
To Next Page
Loading...