Interpret control-panel light patterns (LED model only)
If the printer requires attention, an error code appears on the control-panel display.
Table 8-1 Status-light legend
Symbol for "light off"
Symbol for "light on"
Symbol for "light blinking"
Table 8-2 Control-panel light patterns
Light status Error code State of the product Action
All lights are off.
The printer is turned off or in
low power mode.
Press the power button to turn
on the printer.
Ready and attention lights
blink.
The status lights cycle during
the formatter initialization
period or when the printer is
processing a cleaning page.
No action is required. Wait for
the initialization period to end.
The product should enter the
ready state when the
initialization period is finished.
Ready light is on.
The printer is in the ready
state.
No action is required. The
printer is ready to receive a
print job.
Ready light is blinking.
The printer is receiving or
processing data.
No action is required. The
printer is receiving or
processing a print job.
ENWW Interpret control-panel light patterns (LED model only) 69
To Next Page
Loading...