Need help?Do you have a question about the HP LE2201w and is the answer not in the manual?
General| 3D | No |
|---|---|
| Pixel pitch | 0.282 x 0.282 mm |
| Aspect ratio | 16:10 |
| Display diagonal | 22 \ |
| Display resolution | 1680 x 1050 pixels |
| Viewing angle, vertical | 160 ° |
| Contrast ratio (dynamic) | - |
| Contrast ratio (typical) | 1000:1 |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 720 x 400, 1152 x 870, 1280 x 960, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1440 x 900 (WXGA+), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA) |
| Plug and Play | Yes |
| LED indicators | Power |
| Tilt angle range | -5 - 25 ° |
| Panel mounting interface | 100 x 100 mm |
| Product color | Black |
| Country of origin | China |
| Storage temperature (T-T) | 20 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| Package depth | 161 mm |
| Package width | 587 mm |
| Package height | 489 mm |
| Package weight | 4700 g |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 1 W |
| Power consumption (standby) | 2 W |
| Power consumption (typical) | 35 W |
| Sync input impedance | 75 Ω |
| Dimensions (W x D x H) (imperial) | 20.28 x 2.36 x 13.58 \ |
| Mean time between failures (MTBF) | 30000 h |
| DVI-D ports quantity | 0 |
Weight and Dimensions| Depth (with stand) | 207 mm |
|---|---|
| Height (with stand) | 415 mm |
| Depth (without stand) | 60 mm |
| Width (without stand) | 515 mm |
| Height (without stand) | 345 mm |
| Weight (without stand) | 5200 g |
To Next Page
