EasyManuals Logo

HP LE2201w User Manual

HP LE2201w
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
To use the auto-adjustment feature:
1. Allow the monitor to warm up for 20 minutes before adjusting.
2. Press the -/Auto button on the monitor front panel.
You can also press the Menu button, then select Image Control from the OSD Main Menu.
Refer to
Adjusting the Monitor Settings on page 15 in this chapter.
If the result is not satisfactory, continue with the procedure.
3. Insert the CD in the disc drive. The CD menu is displayed.
4. Select Open Auto-Adjustment Software. The setup test pattern is displayed.
5. Press the -/Auto button on the monitor front panel to produce a stable, centered image.
6. Press the ESC key or any other key on the keyboard to exit the test pattern.
ENWW Using the Auto-Adjustment Function 13
Downloaded from ManualMonitor.com Manuals

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP LE2201w and is the answer not in the manual?

HP LE2201w Specifications

General IconGeneral
3DNo
Pixel pitch0.282 x 0.282 mm
Aspect ratio16:10
Display diagonal22 \
Display resolution1680 x 1050 pixels
Viewing angle, vertical160 °
Contrast ratio (dynamic)-
Contrast ratio (typical)1000:1
Display brightness (typical)250 cd/m²
Supported graphics resolutions720 x 400, 1152 x 870, 1280 x 960, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1440 x 900 (WXGA+), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
Plug and PlayYes
LED indicatorsPower
Tilt angle range-5 - 25 °
Panel mounting interface100 x 100 mm
Product colorBlack
Country of originChina
Storage temperature (T-T)20 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)20 - 80 %
Package depth161 mm
Package width587 mm
Package height489 mm
Package weight4700 g
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)1 W
Power consumption (standby)2 W
Power consumption (typical)35 W
Sync input impedance75 Ω
Dimensions (W x D x H) (imperial)20.28 x 2.36 x 13.58 \
Mean time between failures (MTBF)30000 h
DVI-D ports quantity0
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)207 mm
Height (with stand)415 mm
Depth (without stand)60 mm
Width (without stand)515 mm
Height (without stand)345 mm
Weight (without stand)5200 g

Related product manuals