HP M24fwa User Manual

4
Front components
To identify the components on the front of the monitor, use this illustration and table.
Table 1-1: Front components and their descriptions
Component
Function
1 Menu button
Press to open the OSD menu, select a menu item
from the OSD, or close the OSD menu. When the
OSD menu is open, the Menu light turns on.
2 OSD buttons
(assignable)
When the OSD menu is open, press the buttons to
navigate through the menu. The function light
icons indicate the default button functions. For a
description of these functions, see Using the
function buttons on page 15.
You can reassign the function buttons to quickly
select the most commonly used operations. See
Reassigning the function buttons on page 16.
3 Power button
Turns the monitor on or off.
4 Power light
White: The monitor is on.
Amber: Monitor is in a reduced power state
because of inactivity. See Using Auto-Sleep Mode
on page 16 for more information.
NOTE: You can reconfigure the Function buttons in the OSD menu to quickly select the most commonly used
operations. Press the Menu button to open the OSD, and then select Menu Control. Select Assign

HP M24fwa Specifications

General

Color	ceramic white, white
Screen Type	lcd
Tiltable	yes
Touch Screen	no
Webcam	no
OS Compatibility	not applicable
Screen Size	23.8 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	75hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	1000:1
Synchronization	freesync (amd adaptive sync), not applicable
Horizontal Scan Rate	86 kilohertz
HDR	no
Built-In Speakers	yes
HDMI Ports	1
USB Type B Ports	0
Display Port Inputs	0
Mini Display Port	0
VGA Ports	1
DVI	0
Thunderbolt Ports	0
Voice Assistant	not applicable
Height with Stand	12.42 inches
Width with Stand	21.09 inches
Depth without Stand	6.97 inches
Height without Stand	15.62 inches
Net Weight without Stand	5.5 pounds