HP MSA 2040 Firmware Release Notes

Version:
S200B26
Description
This package delivers firmware for MSA 2040 drive enclosure I/O modules and includes enhanced
features or fixes to issues found during use and additional qualification testing.
NOTE:
• If this drive enclosure is connected to an HP MSA 2040 array controller enclosure and you plan
to update the firmware on the controller, this firmware package is not needed, because drive
enclosure I/O module firmware is included in the controller firmware bundle. When installing a
controller firmware bundle that includes both controller and I/O module firmware, the installation
process updates firmware on controllers in the array enclosure and on I/O modules in the attached
drive enclosures.
• For a list of companion controller and drive enclosure firmware, see “Additional devices supported”
(page 3).
Product models
HP MSA 2040 3.5-inch Large Form Factor Drive Enclosure I/O Module (MSA 2040)
Additional devices supported
The following table lists supported controller enclosure models and firmware versions for when an
MSA2040 drive enclosure is deployed in an MSA array controller enclosure connect environment.
Minimum supported MSA array controller
firmware
Supported MSA array controller
enclosure modelMSA 2040 drive enclosure firmware
GL100R002MSA 2040S200B26
IMPORTANT: After updating array controller firmware or after connecting new drive enclosures to
an existing controller enclosure, verify the firmware compatibility of all devices. If needed, obtain and
install the controller or drive enclosure firmware. Firmware is available for download from the HP
Business Support Center website at http://www.hp.com/support/downloads.
Operating systems
Not applicable for drive enclosures. Operating system environment is determined by the array controller
enclosure. For more information about operating systems supported by the MSA array controllers, see
the HP Storage Single Point Of Connectivity Knowledge (SPOCK) website at http://www.hp.com/
storage/ spock.
1. Enter your HP Passport account credentials.
2. In the left pane, select View by Array.
3. In the Select Disk Array table, click Refine next to MSA
4. On the row that lists your MSA controller model, click Add to Selection.
After a moment, a complete list of supported operating systems for that array controller model is
displayed.
Installation instructions
The following sections discuss installing firmware:
Description 3

HP MSA 2040 Specifications

General

Brand	HP
Model	MSA 2040
Category	Storage
Language	English