HP MSA 2040 LFF DC-power Chassis
C8R13A
(Will accept one or two MSA 2040 SAN or MSA 2040 SAS controllers and can
accommodate up to twelve 3.5-in (LFF) drives)
Configuration and
Management Tools
HP Storage Management Utility (SMU). Management access, out-of-band: WEB GUI, CLI. Interface Types:
USB, /100/1000 Ethernet. Protocols Supported SNMP, SMI-S, SSL, SSH, SMTP, FTP, HTTP, Telnet
MSA 2040 Software and
Documents
Support CD
All product documentation (CD can be used on ALL supported server Operating Systems.)
Host Software Bundles (Win and Linux for both ProLiant x86, ProLiant x64 and Integrity IA64servers)
CD updated quarterly on HP.com with sustaining firmware updates
Hot Plug Expansion and
Replacement Support
All MSA 2040 models support hot plug expansion and replacement of redundant controllers, enclosures,
fans, power supplies, and I/O modules for simple, fast installation and maintenance. Hot add expansion of
disk enclosures is also supported.
Snapshot and Clone
All MSA 2040 arrays come standard with 64 snaps, 512 snaps is available as an option. This controller based
functionality offers higher levels of data protection, enables an almost instant recovery from data failure or
corruption and offers alternative development testing of 'offline' production data and the ability to backup
snapped/cloned data.
Overview
The MSA 2040 arrays come integrated with web browser and CLI based software for storage and RAID
management, setup, configuration, and troubleshooting. This reduces the cost of ownership by reducing
the training and technical expertise necessary to install and maintain your HP storage solution.
The SPOCK database provides interoperability information for thousands of components and millions of
component combinations. It is available to all users at
http://www.hp.com/storage/spock
.
Server Compatibility
NOTE:
depends on protocol
Supports most HP ProLiant, BladeSystems and Integrity servers including
HP ProLiant DL, ML
HP c-Class Blade Servers
Integrity servers, IA64
Compatibility must be confirmed at:
http://www.hp.com/storage/spock
Industry Standard servers
support
Supports most multi-vendor industry standard 32-bit Intel and AMD based (x86) servers. HP
requires the Third-Party Server to be logo'd and listed on the Microsoft Windows Server Catalog.
Refer to the Microsoft website:
http://www.microsoft.com/windows/catalog/server/
HP Division recommends that the Third-Party Server Vendor is an active member of TSANet. Refer
to the TSANet website for details:
www.tsanet.com
Non-HP servers will generally be supported if the HP storage stack is used. This includes supported
HP branded HBAs and drivers, and supported FC switches.
OS Support
Fibre Channel ports
Refer to the HP support statements for complete current OS version support:
http://www.hp.com/storage/spock
Microsoft Windows Server 2012, x64 (Standard, Enterprise, Datacenter)
Microsoft Windows Server 2008 R2 x64
Microsoft Windows Server x64 Hyper-V
VMware
HP-UX
Red Hat Linux (32/64)
SuSE SLES (32/64)
Web Browser support
The MSA 2040 supports target based management, and include a Web interface and a telnet
interface, and require a web browser for management.
The MSA 2040 management supports Microsoft Internet Explorer, Mozilla Firefox, and Google
Chrome.
QuickSpecs
HP MSA 2040 Storage
Family Information
DA - 14603 Worldwide — Version 4 — December 9, 2013
Page 14
To Next Page
Loading...
