HP MSA P2000 G3 - Page 16

Microsoft Windows Server 2008 x64 Hyper-V
VMware
OpenVMS
Apple Mac OS X (requires ATTO Celerity 8Gb FC HBA)
Solaris 10 (x86)
OS Support
Fibre Channel Ports
(Integrity)
HP-UX
Windows
OpenVMS
Linux
OS Support
1GbE iSCSI ports
on the G3 Combo FC/iSCSI
Controller
Microsoft Windows Server 2012
Microsoft Windows Server 2008 and 2008 R2 (x64, IA64)
Microsoft Windows Server 2008 x64 Hyper-V
Microsoft Windows 2003 (SP1, SP2, and R2) and 2003 R2 (IA32, x64)
Red Hat Enterprise Linux (32/64)
SuSE Linux IA32, x64
VMware ESX
OS Support
G3 SAS Controller
Refer to the HP support statements for complete current OS version support:
http://www.hp.com/storage/spock
Microsoft Windows Server 2012
Microsoft Windows Server 2008 IA32, x64
Microsoft Windows Server 2008 R2
Microsoft Windows 2003 and 2003 R2 IA32, x64
Red Hat Linux (32/64)
SuSE SLES (32/64)
Microsoft Windows Server 2008 x64 Hyper-V
VMware
Solaris 10 (x86)
OS Support
G3 1Gb iSCSI Controller
Microsoft Windows Server 2012
Microsoft Windows Server 2008 SP1, SP2, R2
Microsoft Hyper-V (x64 only)
Microsoft Windows Server 2003 and 2003 R2, SP2
VMware
Red Hat Linux (32/64)
SuSE SLES (32/64)
OS Support
G3 10GbE iSCSI Controller
Microsoft Windows Server 2012
Microsoft Windows Server 2008 SP1, SP2, R2
Microsoft Hyper-V (x64 only)
Microsoft Windows Server 2003 and 2003 R2, SP2
Red Hat Linux (32/64)
SuSE SLES (32/64)
VMware
NOTE: the G3 10GbE array must connect to a 10GbE switch; direct connect to the G3 10GbE array must be
to a 10GbE NIC and supported by the OS.
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Family Information
DA - 13551 North America — Version 36 — December 9, 2013 Page 16