HP msm4 series

viii
Step 3: Switch the MSM320 to autonomous mode ............................................6-8
Step 4: Log in..........................................................................................................6-8
Step 5: Assign an IP address to the MSM320......................................................6-9
Step 6: Test the wireless network........................................................................6-9
Step 7: Perform additional configuration .........................................................6-10
To enable access to other resources ..........................................................6-10
7 MSM320-R
Introduction ..................................................................................................................7-3
Package contents...................................................................................................7-3
Protection equipment needed..............................................................................7-3
Hardware overview......................................................................................................7-4
Radios and antennas .............................................................................................7-5
Ethernet port..........................................................................................................7-5
Resetting to factory defaults ................................................................................7-5
Important information to read before installing ......................................................7-5
PROFESSIONAL INSTALLATION REQUIRED...........................................7-5
Surge protection and grounding ..........................................................................7-5
Cabling ....................................................................................................................7-6
Country of use........................................................................................................7-6
External antennas..................................................................................................7-6
Safety.......................................................................................................................7-6
Installation ....................................................................................................................7-7
Step 1: Plan the installation..................................................................................7-7
Step 2: Install cabling ............................................................................................7-8
Step 3: Prepare the weatherproof Ethernet cable.............................................7-8
Step 4: Install the MSM320-R................................................................................7-9
Step 5: Power the MSM320-R .............................................................................7-11
Initial configuration (autonomous mode)...............................................................7-11
Step 1: Configure your computer ......................................................................7-11
Step 2: Connect the cables and power on the MSM320-R ..............................7-12
Step 3: Switch the MSM320-R to autonomous mode ......................................7-12
Step 4: Log in........................................................................................................7-12
Step 5: Assign an IP address to the MSM320-R................................................7-13
Step 6: Test the wireless network......................................................................7-14
Step 7: Perform additional configuration .........................................................7-14