To Next Page

To Previous Page

MSM335

Initial configuration (autonomous mode)

8-11

2. A security certificate warning is displayed the first time you connect to the management

tool. This is normal. Select whatever option is needed in your Web browser to continue to

the management tool. The security warning will not appear again unless you change the

IP address of the MSM335.

3. On the Login page, specify admin for both Username and Password and then select

4. Select Switch to Autonomous Mode and confirm the change. The MSM335 restarts in

autonomous mode.

Note To avoid a delay after switching modes, clear the ARP (address resolution protocol) cache on

your computer. In Windows for example, from the Windows Start menu, select Run and

enter “arp -d” (without the quotes). Select OK.

Step 4: Log in

1. Wait until the Power light stops blinking and remains on.

2. On the Login page, specify admin for both Username and Password, then and select

3. On the License Agreement page, read the agreement and select Accept License

Agreement.

4. The registration page appears. It is recommended that you register later by selecting

Maintenance > Registration.

5. If a Country prompt appears, select the country in which the MSM335 will operate. The

correct country must be selected. See Country of use on page 8-6.

6. At the password prompt it is recommended that you change the default password and

select Save. Passwords must be at least six characters long and include four different

characters.

The management tool is organized with menus and sub-menus. Instructions for making menu

selections, such as “select Wireless > Local mesh” instruct you to select the Wireless menu

and then the Local mesh sub-menu, as follows:

Step 5: Assign an IP address to the MSM335

By default the MSM335 operates as a DHCP client. This means that if the network has a

DHCP server, the MSM335 will automatically receive a new IP address in place of its default

address of 192.168.1.1 upon connecting to the network. Use one of the following methods to

assign an IP address to the MSM335:

Main menu

Sub-menu

HP msm4 series User Manual

Questions and Answers: