HP msm4 series

vii
Initial configuration (autonomous mode)...............................................................5-10
Step 1: Configure your computer ......................................................................5-11
Step 2: Connect the cables and power on the MSM310-R ..............................5-11
Step 3: Switch the MSM310-R to autonomous mode ......................................5-11
Step 4: Log in........................................................................................................5-12
Step 5: Assign an IP address to the MSM310-R................................................5-12
Step 6: Test the wireless network......................................................................5-13
Step 7: Perform additional configuration .........................................................5-13
To enable access to other resources ..........................................................5-14
6 MSM320/MSM325
Introduction ..................................................................................................................6-2
Package contents...................................................................................................6-2
Hardware overview......................................................................................................6-2
Status lights ............................................................................................................6-2
Autonomous mode..........................................................................................6-3
Controlled mode .............................................................................................6-3
Ethernet ports ........................................................................................................6-4
Reset button ...........................................................................................................6-4
Radios and antennas .............................................................................................6-4
Important information to read before installing ......................................................6-4
For indoor installation only. ..........................................................................6-4
PROFESSIONAL INSTALLATION REQUIRED...........................................6-4
Surge protection and grounding ..........................................................................6-5
Cabling ....................................................................................................................6-5
Plenum installation................................................................................................6-5
Country of use........................................................................................................6-5
External Antennas.................................................................................................6-5
Power supply..........................................................................................................6-5
Safety.......................................................................................................................6-6
Installation ....................................................................................................................6-6
Installing in a plenum............................................................................................6-6
Powering the MSM320 ..........................................................................................6-6
Initial configuration (autonomous mode).................................................................6-6
Step 1: Configure your computer ........................................................................6-7
Step 2: Connect the cables and power on the MSM320....................................6-7