• The console cable is correctly connected, the terminal or PC used for configuration has started, and
the configuration parameters have been set.
• If a CF card is used, verify that the CF card is in position.
• Make sure the installed interface modules are in position.
Powering on the router
1. Turn on the switch of the power supply system for the router.
2. Turn on the switch of the AC or DC power modules.
Observing boot information
Power on the router, and you can see the following information:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* HP MSR1003-8S BootWare, Version 2.30 *
* *
****************************************************************************
Copyright (c) 2010-2015 Hewlett-Packard Development Company, L.P.
Compiled Date : Sep 11 2014
CPU ID : 0x8
CPU L1 Cache : 32KB
CPU L2 Cache : 256KB
Memory Type : DDR3 SDRAM
Memory Size : 1024MB
Memory Speed : 400MHz
Flash Size : 256MB
CPLD Version : 1.0
PCB Version : 2.0
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/msr100x-cmw710-system-e030206.bin.......................
.................................Done.
Loading file flash:/msr100x-cmw710-security-e030206.bin....Done.
Loading file flash:/msr100x-cmw710-voice-e030206.bin....Done.
Loading file flash:/msr100x-cmw710-data-e030206.bin......Done.
Loading file flash:/msr100x-cmw710-boot-e030206.bin........Done.
23
To Next Page
Loading...
Need help?
General
