3
Form factor 8U (two 4U modules)
Weight 136 lb (61.7 kg)
Dimensions (Inches: H x W x D) 13.8 x 19 x 29.37
Number of power plugs 4
Power supply plug type IEC 320 C14
Maximum watts RMS 652
NonStop system supported HP Integrity NonStop BladeSystem NB54000c and HP Integrity BladeSystem NB56000c
NonStop OS versions Release RVU is J06.15
Minimum RVU is J06.14 with required SPRs
Compliance with IEEE standards 10 megabits per second Ethernet: IEEE 802.3—10BASE-T CSMA/CD (Ethernet)
10/100 megabits per second Fast Ethernet: IEEE 802.3u—100BASE-TX Fast Ethernet with
auto-negotiation of speed
1000 megabits per second Gigabit Ethernet: IEEE 802.3ab—1000BASE-T Gigabit Ethernet and
IEEE802.3z—1000BASE-SX
IEEE 802.3x—Flow control in full-duplex Ethernet LANs
1000 megabits per second Gigabit Ethernet
Ethernet ports cabling requirements The procurement of cables is a customer responsibility. The G16SE uses the following standard cables that
can be purchased from third-party vendors:
• CAT 5, CAT 5e, or CAT 6 UTP (4 pairs)
• 850 nm 50/125 μm multimode ber
Connectors Standard RJ-45 pin-out connector
Standard LC duplex connector
Specications
Data sheet | HP NonStop G16SE