Using a Kensington security cable
To prevent unauthorized removal of the switch, you can use a Kensington Slim MicroSaver security cable (not
included) to attach the switch to an immovable object.
4. Connect the Switch to a Power Source
Procedure
1. For the 1820 24-port and 48-port switches, plug the included power cord into the switch’s power connector
and into a nearby AC power source.
For the 1820 8-port switches, plug the AC/DC adapter’s power cord into the switch, and then plug the
AC/DC power adapter into a nearby AC power source.
22 Using a Kensington security cable
To Next Page
Loading...
