EasyManuals Logo

HP OMEN 25 User Manual

HP OMEN 25
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Attaching the monitor stand
CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause
damage.
TIP: Consider the placement of the display, because the bezel might cause interfering reections from
surrounding light and bright surfaces.
1. Lift the monitor from its box and place it facedown on a at surface covered by a clean, dry cloth.
2. Remove the base and neck of the stand from the box.
3. Press the cable management feature (1) into place on the neck.
4. To assemble the base and neck, align the base with the neck (2), insert the thumbscrew on the base into
the neck, and tighten the thumbscrew (3) securely.
5. Attach the stand to the monitor by pressing the bracket (4) at the top of the stand onto the connector on
the back of the display head until the bracket clicks securely into place.
Setting up the monitor 5

Other manuals for HP OMEN 25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP OMEN 25 and is the answer not in the manual?

HP OMEN 25 Specifications

General IconGeneral
3DNo
Panel typeTN
Pixel pitch0.283 x 0.283 mm
Screen shapeFlat
Display diagonal24.5 \
Display technologyLED
Native aspect ratio16:9
Viewable size, vertical302.6 mm
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Viewable size, horizontal543.7 mm
Display brightness (typical)400 cd/m²
Supported graphics resolutions640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080)
CertificationCE; ICES; VCCI; FCC; C-Tick; CB; TUV-GS; ISO-9241-307; cTUVus; TUV LBL; CCC; CEL; BSMI; KCC; Australia MEPS; E-standby; PSB; ISC; Microsoft WHQL Certification (Windows 10, Windows 8.1 and Windows 7); SmartWay Transport Partnership - NA only
Product colorBlack
Country of originChina
Market positioningGaming
VESA mounting-
Tilt angle range-5 - 23 °
USB hub version3.2 Gen 1 (3.1 Gen 1)
VGA (D-Sub) ports quantity0
USB Type-A downstream ports quantity3
HP segmentHome
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (max)40 W
Annual energy consumption35.3 kWh
Power consumption (standby)0.5 W
Power consumption (typical)30 W
Sustainability certificatesENERGY STAR
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 70 %
Cables includedAC, HDMI, DisplayPort, USB
Harmonized System (HS) code85285210
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)227.5 mm
Width (with stand)569 mm
Height (with stand)407.9 mm
Weight (with stand)4600 g
Depth (without stand)62.8 mm
Height (without stand)346.2 mm
Weight (without stand)3550 g

Related product manuals