3. Connect the Type-B connector of a USB upstream cable to the USB upstream port on the rear of the
monitor. Then connect the cable’s Type-A connector to a USB downstream port on the source device.
4. Connect one end of the power cord to the AC adapter (1) and the other end to a grounded electrical
outlet (2), and then connect the AC adapter to the monitor (3).
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug.
Setting up the monitor 9