HP OmniBook 6000 Startup Guide

Making Connections
Using Plug-In Modules
36 Startup Guide
3. Press the button on the module release latch, and slide the latch toward the front of
the computer.
4. Grasp the module and pull it out.
5. Slide the new plug-in module into the computer until it clicks into place.
If you have a CD-ROM drive or other module in the module bay, you can connect the
floppy disk drive to the parallel port. See “Using Plug-In Modules” in the online
Reference Guide.

HP OmniBook 6000 Specifications

General

Brand	HP
Model	OmniBook 6000
Category	Laptop
Language	English