M.2 PCIe solid-state drive specications
Table 11-3 M.2 PCIe solid-state drive specications
256 GB* 512 GB* 1 TB*
Dimensions
Height 1 mm 1 mm 1 mm
Length 50.8 mm 50.8 mm 50.8 mm
Width 28.9 mm 28.9 mm 28.9 mm
Weight < 10 g < 10 g < 10 g
Interface type ATA-7 ATA-7 ATA-7
Transfer rate
Sequential Read
Random Read
Up to 2150 MB/s
Up to 300,000 IOPs
Up to 2150 MB/s
Up to 300,000 IOPs
Up to 2150 MB/s
Up to 300,000 IOPs
Sequential Write
Random Write
Up to 1260 MB/sec
Up to 100,000 IOPs
Up to 1550 MB/sec
Up to 100,000 IOPs
Up to 1550 MB/sec
Up to 100,000 IOPs
Ready time, Maximum (to not busy) 1.0 sec 1.0 sec 1.0 sec
Access times
Logical 0.1 0.1 0.1
Total logical sectors 500,118,192 1,000,215,216 1,500,336,388
Operating temperature
Operating 0° to 70°C (32°F to
158°F)
0° to 70°C (32°F to
158°F)
0° to 70°C (32°F to
158°F)
Non-operating –40° to 80°C (–40°F to
176°F)
–40° to 85°C (–40°F to
185°F)
–40° to 85°C (-40°F to
185°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
94 Chapter 11 Specications
To Next Page
Loading...
Need help?
General