HP P34hc User Manual

2. Connect a video cable.
NOTE: Except for USB Type-C input, the monitor automatically determines which inputs have valid
video signals. You must manually select USB Type-C input. To select any input, including USB Type-C,
open the OSD menu and select Input.
● Connect one end of a DisplayPort cable to the DisplayPort connector on the rear of the monitor and
the other end to the DisplayPort connector on the source device.
● Connect one end of an HDMI cable to the HDMI port on the rear of the monitor and the other end to
the HDMI port on the source device.
● Connect one end of a USB Type-C cable to the USB Type-C port on the rear of the monitor and the
other end to the USB Type-C port on the source device.
10
Chapter 1 Getting started

HP P34hc Specifications

General

Screen Size	34 inches
Resolution	3440 x 1440
Aspect Ratio	21:9
Panel Type	VA
Refresh Rate	60 Hz
Response Time	5 ms
Brightness	300 cd/m²
Curvature	1500R
Contrast Ratio	3000:1
Ports	1x DisplayPort 1.2, 1x HDMI, 1x USB-C, 4x USB-A, 1x USB-B