HP P34hc User Manual

NOTE: The monitor’s USB Type-C port provides data, video, and power delivery (up to 65 W).
The host device must be able to support DisplayPort Alt Mode (video, charging, and USB 3.1) over
the USB Type-C connector.
3. Connect a USB cable.
● Connect one end of the USB Type-B cable to a USB Type-B port on the monitor and the other end to
a USB Type-A port on the source device.
● Connect one end of a USB cable to a USB port on the monitor and the other end to the USB port on
the source device.
4. Connect one end of the power cord to the power connector and the other end to a grounded AC outlet.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
Connecting the cables
11

HP P34hc Specifications

General

Screen Size	34 inches
Resolution	3440 x 1440
Aspect Ratio	21:9
Panel Type	VA
Refresh Rate	60 Hz
Response Time	5 ms
Brightness	300 cd/m²
Curvature	1500R
Contrast Ratio	3000:1
Ports	1x DisplayPort 1.2, 1x HDMI, 1x USB-C, 4x USB-A, 1x USB-B