Service Manual Removal and Replacement 2-25
Removing the Infrared (I/R) PCA
(Authorized Service Providers Only)
Required Equipment
•
#1 Phillips screwdriver.
Removal Procedure
1.
Unplug the AC adapter, if present, and remove the battery.
2.
Remove these additional assemblies:
•
Hard disk drive (page 2-6).
•
Keyboard cover (page 2-10).
•
Switchboard PCA (page 2-13).
•
Keyboard (page 2-13).
•
Display assembly (page 2-17).
•
Top case (page 2-20).
3.
Disconnect the cable from the motherboard.
4.
Remove the screws that secure the I/R PCA to the bottom case.
5.
Remove the I/R PCA.
To Next Page
Loading...
