Switch cover and keyboard
Description Spare part number
Switch cover (includes LED board and cable), Onyx 512829-001
Switch cover (includes LED board and cable), Moonlight White (replaced by 571747–001 on select
models)
518110-001
Switch cover (includes LED board and cable), Moonlight White (replaces 571747–001 for select
models only)
571747–001
Switch cover (includes LED board and cable), Espresso Black (replaced by 571957–001 on select
models)
518790-001
Switch cover (includes LED board and cable), Espresso Black (replaces 5718790–001 for select
models only)
571957–001
Keyboards
For a list of all keyboards available for your country or region, see pages 23 to 26.
Before removing the switch cover and keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 59).
Remove the switch cover and keyboard:
1. Position the computer upside down with the front toward you.
76 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
Need help?
General