Security menu
Select Function
Administrator password Enter, change, or delete an administrator password.
Power-On Password Enter, change, or delete a power-on password.
System Configuration menu
Select Function
Language Support Change the language of Setup Utility.
Virtualization Technology (select models only) Enable/disable the processor Virtualization Technology.
LAN Power Saving (select models only) Enable/disable LAN Power Saving. When enabled, saves power when
the computer is in DC mode.
Fan Always On Enable/disable Fan Always On. When enabled, the computer fan is
always on.
Action Keys Mode Enable/disable the Action Keys.
Boot Options
●
POST (power-on self test) f10 and f12 Delay (sec.)―Set the delay
for the f10 and f12 functions of Setup Utility in intervals of 5 seconds
each (0, 5, 10, 15, 20).
●
HP QuickWeb—Enable/disable the QuickWeb Boot menu in Setup
Utility.
◦
Enable/disable the HP QuickWeb Boot Menu during POST.
◦
Delay to boot Windows—Set the delay for the HP QuickWeb
Boot Menu to 2, 3, 5, 10, 15, or 30 seconds.
●
CD-ROM Boot―Enable/disable boot from CD-ROM.
●
Floppy Boot―Enable/disable boot from diskette.
●
Internal Network Adapter Boot―Enable/disable boot from the
internal network adapter.
●
Boot Order―Set the boot order for:
◦
Notebook Hard Drive
◦
Internal CD/DVD ROM Drive
◦
USB Disk on Key/USB Hard Drive
◦
USB CD/DVD ROM Drive
◦
USB Floppy
◦
Network Adapter
104 Appendix A Setup Utility (BIOS)
To Next Page
Loading...
