Removing a CD, DVD, or BD
To remove an optical disc:
1. Press the release button (1) on the drive bezel to release the disc tray.
2. Gently pull out the tray (2) until it stops.
3. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.
4. Close the disc tray, and then place the disc in a protective case.
64 Chapter 7 Drives
To Next Page
Loading...
Need help?
General