Table 5-1 Bottom cover descriptions and part numbers
Description Spare part number
Bottom cover (includes two long rubber feet)
Metal for use on computer models equipped with a graphics subsystem with discrete memory N96459-001
Metal for use on computer models equipped with a graphics subsystem with UMA memory N96460-001
Plastic N96458-001
Before removing the bottom cover, prepare the computer for disassembly (see Preparation for
disassembly on page 50).
Remove the bottom cover:
1. Close the computer and rest it upside down on a flat work surface with the front toward you.
2. Loosen the five Phillips captive screws that secure the bottom cover to the computer.
3. Use a plastic, thin tool (1) to separate the rear edge of the bottom cover from the computer.
Bottom cover
39
To Next Page
Loading...
