c. Release the adhesive tabs (1) that secure the wireless antenna cables to the display
back cover.
d. Detach the wireless antenna transceivers (2) from the display back cover. The wireless
antenna transceivers are attached to the display back cover with double-sided adhesive.
e. Remove the wireless antenna.
The wireless antenna are included in the Display Antenna Kit, spare part number N96464-001.
17. To remove the hinges:
a. Remove the display bezel.
b. Remove the display panel.
c. Remove the six Phillips M2.5 × 4.0 screws (1) that secure the display hinges to the display back
cover.
d. Remove the hinges (2).
The hinges are available using the following spare part number N96466-001.
68
Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
