HP ProBook 465 G11 - Page 36

Table 3-4 Screw Kit contents (continued)
Location Driver Dia Lng Head dia Head thick Plate Qty Location
#1 M2 1.8L 5 0.65 NI 6 System board (2)
and WWAN connector
board (1)
#1 M2 2.5L 4.5 0.5 NI 4 Heat sink
#1 M2 2.5L 4.5 0.5 NI 2 Heat sink (optional)
#1 M2 2.5L 4.5 0.5 NI 2 Fingerprint reader
#1 M2 2.5L 4.5 0.5 NI 4 Smart card
#1 M2 2.5L 4.5 0.5 NI 1 SSD
#1 M2 2.5L 4.5 0.5 NI 1 WLAN module
#1 M2 2.5L 4.5 0.5 NI 1 WWAN module
#1 M2 4L 4.6 0.8 BNI 5 RJ45 jack cover
(3),connector board (1),
and system board (1)
#1 M2 4L 4.6 0.8 BNI 3 I/O holder
#1 M2 4L 4.6 0.8 BNI 3 Fan
#0 M1.6 2L 3.5 0.5 BNI 3 Touchpad (3)
#1 M2.5 8.3L 4.3 0.8 BNI 3 Bottom cover
#1 M2.5 10.4L 4.3 0.8 BNI 2 Bottom cover
(hinge side)
Screw Kit components 29